3003 aluminum wire rod for making rivets is a commonly used product of aluminum-manganese alloy series. Better than having manganese alloy elements, this product has anti-rust properties, also known as anti-rust aluminum. The strength is about 10% higher than 1100, and the formability, weldability and corrosion resistance are good. Used for processing parts and components that require good formability, high corrosion resistance, and good weldability, or require both these properties and higher strength than 1XXX series alloys, such as kitchen utensils, food, and chemical product processing. Storage devices, tanks and tanks for transporting liquid products, various containers and pipes processed with thin plates, general utensils, heat sinks, cosmetic plates, photocopier rollers, ship materials



This product is often used in humid environments such as outer packaging, mechanical parts, refrigerators, air-conditioning ventilation pipes, etc. This product has good anti-rust ability.
Aluminum Al: balance silicon Si: 0.6 copper Cu: 0.05--0.2 zinc Zn: 0.10 manganese Mn: 1.0--1.5 iron Fe: 0.7

Single: 0.05

All Material 3003 (For making Rivets)

Gauge: 24

Lengths: 10 ft (3 Meters)

3003 is an AL-Mn series alloy, which is a kind of rust-proof aluminum widely used. The strength of this alloy is not high (slightly higher than that of industrial pure aluminum) and cannot be strengthened by heat treatment. Therefore, cold working methods are used to improve its mechanical properties: The annealed state has a high plasticity, and the plasticity is still good in the semi-cold work hardening, the plasticity is low in the cold work hardening, good corrosion resistance, good weldability, and poor machinability. Uses are mainly used for low load parts that require high plasticity and good weldability, working in liquid or gaseous media, such as mailboxes, gasoline or lubricant pipes, various liquid containers, and other small load parts made by deep drawing: 3003 aluminum wire rod is used to make rivets.